| Users Online Now: 1,334 (Who's On?) | Visitors Today: 319,608 | |
| Pageviews Today: 503,849 | Threads Today: 184 | Posts Today: 3,106 |
| 05:34 AM | ||
| Users Online Now: 1,334 (Who's On?) | Visitors Today: 319,608 | |
| Pageviews Today: 503,849 | Threads Today: 184 | Posts Today: 3,106 |
| 05:34 AM | ||
Any auto mechanics on here? | |
JustmeTX
 User ID: 80193276  United States04/14/2022 11:11 PM  Report Abusive Post Report Copyright Violation | |
| SomeRandomPerson
User ID: 79771883 United States04/14/2022 11:28 PM  Report Abusive Post Report Copyright Violation | P0304 means the ECU has found cylinder #4 is not firing properly. The other one I dunno Quoting: 762hillboy P0304 is misfire in cylinder 4...I've since replaced all 4 plugs but not the coils or coil pack. Couldn't swap coils to see if it was the coil as they are all different lengths. P0441 is Evap Control System Incorrect Purge flow...I replaced the Purge Control Solenoid valve earlier today (which pretty much all Hyundai techs who assist on the net say will fix that issue). The part that I removed was indeed defective...wouldn't hold any vacuum at all when I tested it. I've seen brand new plugs fail. In fact got a ford pickup once from a car lot. Had a miss, and they had done tune up, new plugs wires and distributor cap. There were no scanners back then. So told the dude at the lot, it has a burnt valve and will need a valve job, he lowered the price WAY down. So got the truck home, changed out plugs with some older ones I had still working, until I fixed the miss. ONE plug, brand new, wasn't firing. I believe in science NOT religion. Giving me bad karma for that, is anti-religious (you're passing judgement) I am just a man. Of no significance. Who found religion to be full of lies, and wrong doing, conflicted teachings I understand microwave communications. I do not stand for the NWO, it sucks. |
| rubyheartdrips
User ID: 78913634 United States04/14/2022 11:37 PM Report Abusive Post Report Copyright Violation | Need to check the belts on your in-line rotary gurter. Some squelch oil in the cam shaft would be the cheap and effective fix if there's pitting, no need to take it into a shop. Last Edited by rubyheartdrips on 04/14/2022 11:38 PM @rubyheartdrips |
