Godlike Productions - Discussion Forum
Users Online Now: 2,142 (Who's On?)Visitors Today: 630,444
Pageviews Today: 1,095,952Threads Today: 454Posts Today: 7,680
01:16 PM


Rate this Thread

Absolute BS Crap Reasonable Nice Amazing
 

How to use Colloidal Silver as Medicine

 
Keep2theCode
Offer Upgrade

User ID: 20545539
United States
10/03/2013 08:38 PM
Report Abusive Post
Report Copyright Violation
How to use Colloidal Silver as Medicine
DISCLAIMER: This is non-professional opinion and should not be taken as advice from a medical doctor. This concerns typical viruses/bacterial infections such as the common cold, or as first-aid, not serious disease.

------------------------------------------------------

Colloidal silver is a safe, natural antimicrobial. It will not interfere with pharmaceuticals and will not turn your skin blue, as long as you don't chug gallons of it or use a poorly-made colloid (I recommend [link to www.mesosilver.com] It works best when used as soon as symptoms begin to appear, and is effective as long as it can touch the germs.

Eyes

-- Put a drop or two in the eye to cure infection

Nose/Sinuses

-- Get about a half-teaspoon or so in a dropper. Lie down on your back at the edge of a bed or couch and let your head drop back so the top of your head points straight down. Put a couple drops in each nostril and wait for the (possibly intense) pain/burning to stop. Then repeat till the silver is gone. Quickly turn over and face the floor so the silver drains into the front sinuses behind the eyes and cheekbones. Then get up and let the silver drain into your throat; it's perfectly safe to swallow. Repeat twice a day till symptoms are gone.

Throat

-- Gargle several times a day.

Lungs

-- Use a half-teaspoon or so in a nebulizer to treat bronchial or lung infections, even pneumonia.

Skin

-- Put a drop or so on a bandage and apply to wounds.

Digestion

-- Swallow several tablespoons twice a day, preferably when you won't be eating or drinking for at least an hour; bedtime is best.

This is a known safe antimicrobial, even for children and babies.

Last Edited by Keep2theCode on 10/03/2013 08:56 PM
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 08:47 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
PS: I would recommend stocking up on this stuff. The price of silver is still being held low, and will probably remain low as long as the dollar lives. It's a great addition to any bug-out bag or first-aid kit. It also keeps very well for a long time as long as it's not in the sun.

The taste is kind of like mineral water, with possibly a slight bitter aftertaste. You can rinse your mouth afterwards, but don't dilute the silver. And yes, you could swish it in your mouth as a mouthwash too.

Last Edited by Keep2theCode on 10/03/2013 08:48 PM
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Anonymous Coward
User ID: 27907570
United States
10/03/2013 08:53 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Didn't the blue guy just kick the bucket?
I think I'll pass on silver.

Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 08:55 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Didn't the blue guy just kick the bucket?
I think I'll pass on silver.
 Quoting: Anonymous Coward 27907570


Didn't read the OP, did you.
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Anonymous Coward
User ID: 12680882
United States
10/03/2013 08:55 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Woman who turned blue [link to science.howstuffworks.com]
Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 08:56 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Woman who turned blue [link to science.howstuffworks.com]
 Quoting: Dr. Ben Schillen


The blue people chugged it and did not use pure colloids. Please read the OP.
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Anonymous Coward
User ID: 12680882
United States
10/03/2013 08:57 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Woman who turned blue [link to science.howstuffworks.com]
 Quoting: Dr. Ben Schillen


The blue people chugged it and did not use pure colloids. Please read the OP.
 Quoting: Keep2theCode


She did not drink it. Please watch the video.

kthxby
Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 08:58 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
[link to www.mesosilver.com]

Mesosilver is manufactured in an FDA registered facility, has no potentially dangerous protein additives (mild protein), and is non-toxic. See Material Safety Data Sheet (MSDS).

It does not interact or interfere with any medications and is made using the highest purity, sterile reagent grade deionized water. Its concentration is 20 ppm (minimum) total silver.

-- Will not cause argyria, a discoloration of the skin caused by some forms of silver (protein products).
-- No adverse side effects have ever been reported.
-- Contains only pure water and pure silver.
-- Does not require refrigeration after opening.
-- Infinite shelf life.

 Quoting: source


Last Edited by Keep2theCode on 10/03/2013 08:58 PM
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Anonymous Coward
User ID: 47840528
United States
10/03/2013 08:59 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
DISCLAIMER: This is non-professional opinion and should not be taken as advice from a medical doctor. This concerns typical viruses/bacterial infections such as the common cold, or as first-aid, not serious disease.

------------------------------------------------------

Colloidal silver is a safe, natural antimicrobial. It will not interfere with pharmaceuticals and will not turn your skin blue, as long as you don't chug gallons of it or use a poorly-made colloid (I recommend [link to www.mesosilver.com] It works best when used as soon as symptoms begin to appear, and is effective as long as it can touch the germs.

Eyes

-- Put a drop or two in the eye to cure infection

Nose/Sinuses

-- Get about a half-teaspoon or so in a dropper. Lie down on your back at the edge of a bed or couch and let your head drop back so the top of your head points straight down. Put a couple drops in each nostril and wait for the (possibly intense) pain/burning to stop. Then repeat till the silver is gone. Quickly turn over and face the floor so the silver drains into the front sinuses behind the eyes and cheekbones. Then get up and let the silver drain into your throat; it's perfectly safe to swallow. Repeat twice a day till symptoms are gone.

Throat

-- Gargle several times a day.

Lungs

-- Use a half-teaspoon or so in a nebulizer to treat bronchial or lung infections, even pneumonia.

Skin

-- Put a drop or so on a bandage and apply to wounds.

Digestion

-- Swallow several tablespoons twice a day, preferably when you won't be eating or drinking for at least an hour; bedtime is best.

This is a known safe antimicrobial, even for children and babies.
 Quoting: Keep2theCode


Does not have to be Mesosilver.
Vic-chick13

User ID: 46621115
Canada
10/03/2013 09:00 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Swear by the stuff for myself. hf
Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 09:01 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Does not have to be Mesosilver.
 Quoting: Anonymous Coward 47840528


Did I say it had to be Mesosilver?
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 09:01 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Swear by the stuff for myself. hf
 Quoting: Vic-chick13


Our family has used it for years, keeps us from needing doctors.
Have I now become your enemy by telling you the truth? (Gal. 4:16)
Elchemist
User ID: 15740069
United States
10/03/2013 09:03 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
I will reveal a great secret to you.

With the Help of Silver our Great Queen.


Alchemy is the Study of Making Medicines out of Metals.

In our age of technology its easier for you to understand the world of the Very Small. But you dont think of it in the same way an alchemist does.


Colloidal Silver is very very small particles of Silver.

You have generated them through an electrochemical process.


Its NANO TECHNOLOGY.


Alchemy is the Science of Nano Engineering.


We tear down elements into their smallest constituents.

The Singular particle.


Because down on the Nano Scale.


Elements do strange and amazing things.
Keep2theCode  (OP)

User ID: 20545539
United States
10/03/2013 09:05 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
I will reveal a great secret to you.

With the Help of Silver our Great Queen. ...


Because down on the Nano Scale.


Elements do strange and amazing things.
 Quoting: Elchemist 15740069


Um... well, at least you bring up a point I forgot: particle size and suspension. This makes all the difference, along with the purity of the water to prevent any side-effects (which some people like to parade as typical so people will be afraid of it).

Last Edited by Keep2theCode on 10/03/2013 09:06 PM
Have I now become your enemy by telling you the truth? (Gal. 4:16)
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
01/27/2022 07:25 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Chemically produced Silver nanoparticles have been around for a long time. Dilute forms of silver nitrate were used before antibiotics dominated the field of medicine. It has become necessary to explore the antimicrobial properties of silver-based chemicals again because microbes have gained resistance against the wide range of present-day antibiotics. The advancements in medicine and technology started to merge to combat microbes' adaptability as they successfully become tolerant to antibiotics. It manifested in the form of current technology, Nanomedicine.
In recent years, silver nanoparticles (Ag NPs) have been the subject of many studies due to their potential as antimicrobials. Their special and unique properties can be attributed to their smaller size and larger specific surface area. Many preparation processes have been proposed for controlling the physical or chemical characteristics of Ag NPs. The pharmaceutical industry is well aware of the problem of antibiotic resistance. They want to use silver. Silver is the obvious choice as an antibiotic, antifungal, and antiviral substance.
Pharmaceutical companies are developing patentable processes to produce Ag NPs with diameters of less than 10 nm using a process that employs D-glucose as the reducing agent and soluble starch as the stabilizing agent. The particle sizes of Ag NPs are controlled by modifying reaction system parameters such as pH, temperature, and reactant concentrations. The choice of stabilizing agent is an essential factor for controlling the particle size of Ag NPs since it is reduced within the nanoscopic templates of the stabilizing agent.
The fact that the silver ions are the effective agents is well documented. They cannot sell silver ions as there is no profit in it. The freely available knowledge in "The art of making colloidal silver" and other publications have made it possible for anyone with access to water, silver, and electricity to make EIS, electrically isolated silver.
Anonymous Coward
User ID: 77696991
Canada
01/28/2022 09:33 AM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Chemically produced Silver nanoparticles have been around for a long time. Dilute forms of silver nitrate were used before antibiotics dominated the field of medicine. It has become necessary to explore the antimicrobial properties of silver-based chemicals again because microbes have gained resistance against the wide range of present-day antibiotics. The advancements in medicine and technology started to merge to combat microbes' adaptability as they successfully become tolerant to antibiotics. It manifested in the form of current technology, Nanomedicine.
In recent years, silver nanoparticles (Ag NPs) have been the subject of many studies due to their potential as antimicrobials. Their special and unique properties can be attributed to their smaller size and larger specific surface area. Many preparation processes have been proposed for controlling the physical or chemical characteristics of Ag NPs. The pharmaceutical industry is well aware of the problem of antibiotic resistance. They want to use silver. Silver is the obvious choice as an antibiotic, antifungal, and antiviral substance.
Pharmaceutical companies are developing patentable processes to produce Ag NPs with diameters of less than 10 nm using a process that employs D-glucose as the reducing agent and soluble starch as the stabilizing agent. The particle sizes of Ag NPs are controlled by modifying reaction system parameters such as pH, temperature, and reactant concentrations. The choice of stabilizing agent is an essential factor for controlling the particle size of Ag NPs since it is reduced within the nanoscopic templates of the stabilizing agent.
The fact that the silver ions are the effective agents is well documented. They cannot sell silver ions as there is no profit in it. The freely available knowledge in "The art of making colloidal silver" and other publications have made it possible for anyone with access to water, silver, and electricity to make EIS, electrically isolated silver.
 Quoting: abeland1


can confirm: I bought AtlasNova's starter kit about 15 years ago now, and have long since lost count of how many gallons of CS I've made. Thanks, Abeland, for all of your work and research regarding CS.
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
01/28/2022 11:11 AM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Chemically produced Silver nanoparticles have been around for a long time. Dilute forms of silver nitrate were used before antibiotics dominated the field of medicine. It has become necessary to explore the antimicrobial properties of silver-based chemicals again because microbes have gained resistance against the wide range of present-day antibiotics. The advancements in medicine and technology started to merge to combat microbes' adaptability as they successfully become tolerant to antibiotics. It manifested in the form of current technology, Nanomedicine.
In recent years, silver nanoparticles (Ag NPs) have been the subject of many studies due to their potential as antimicrobials. Their special and unique properties can be attributed to their smaller size and larger specific surface area. Many preparation processes have been proposed for controlling the physical or chemical characteristics of Ag NPs. The pharmaceutical industry is well aware of the problem of antibiotic resistance. They want to use silver. Silver is the obvious choice as an antibiotic, antifungal, and antiviral substance.
Pharmaceutical companies are developing patentable processes to produce Ag NPs with diameters of less than 10 nm using a process that employs D-glucose as the reducing agent and soluble starch as the stabilizing agent. The particle sizes of Ag NPs are controlled by modifying reaction system parameters such as pH, temperature, and reactant concentrations. The choice of stabilizing agent is an essential factor for controlling the particle size of Ag NPs since it is reduced within the nanoscopic templates of the stabilizing agent.
The fact that the silver ions are the effective agents is well documented. They cannot sell silver ions as there is no profit in it. The freely available knowledge in "The art of making colloidal silver" and other publications have made it possible for anyone with access to water, silver, and electricity to make EIS, electrically isolated silver.
 Quoting: abeland1


can confirm: I bought AtlasNova's starter kit about 15 years ago now, and have long since lost count of how many gallons of CS I've made. Thanks, Abeland, for all of your work and research regarding CS.
 Quoting: Anonymous Coward 77696991


Atlasnova's colloidal silver starter kit was my first effort to put something together to help people make their colloidal silver. We had been only selling the 9999 silver wire up to that point. Many customers for the silver wire would ask our advice on making colloidal silver. That was almost 20 years ago, and the widely accepted method was adding salt and letting the current run wild, just letting things go until it turned yellow with a lot of gunk. Using a resistor to limit the current solves that problem. The laser determines when to stop the process. The batteries, the resistor, and the two electrodes separated in the water are connected in series.
When the multimeter probes are placed across the series resistor, they read the voltage dropped by the resistor. That represents the four 9V batteries (36 V) minus the voltage of the two silver wire electrodes. If the distilled water is of high quality, the voltage across the resistor will be relatively low as the current will be minimal. As more and more silver ions enter the distilled water, the water will become more conductive. That increases the current in the circuit, causing the voltage across the resistor to increase gradually. The voltage increase across the resistor will slow at a certain time, indicating that the ion production slows and larger particles form. The laser pointer's beam's visibility allows the user to stop the process before the solution becomes yellow. The multimeter will not measure the PPM of your resulting colloidal silver. You will need to purchase a TDS or EC meter to indicate this. They are available on eBay for under $20.
Have a look at the instructions for using the starter kit.

[link to www.atlasnova.com (secure)]

Last Edited by abeland1 on 04/01/2022 04:54 PM
Anonymous Coward
User ID: 79426688
United Kingdom
01/28/2022 02:58 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Chemically produced Silver nanoparticles have been around for a long time. Dilute forms of silver nitrate were used before antibiotics dominated the field of medicine. It has become necessary to explore the antimicrobial properties of silver-based chemicals again because microbes have gained resistance against the wide range of present-day antibiotics. The advancements in medicine and technology started to merge to combat microbes' adaptability as they successfully become tolerant to antibiotics. It manifested in the form of current technology, Nanomedicine.
In recent years, silver nanoparticles (Ag NPs) have been the subject of many studies due to their potential as antimicrobials. Their special and unique properties can be attributed to their smaller size and larger specific surface area. Many preparation processes have been proposed for controlling the physical or chemical characteristics of Ag NPs. The pharmaceutical industry is well aware of the problem of antibiotic resistance. They want to use silver. Silver is the obvious choice as an antibiotic, antifungal, and antiviral substance.
Pharmaceutical companies are developing patentable processes to produce Ag NPs with diameters of less than 10 nm using a process that employs D-glucose as the reducing agent and soluble starch as the stabilizing agent. The particle sizes of Ag NPs are controlled by modifying reaction system parameters such as pH, temperature, and reactant concentrations. The choice of stabilizing agent is an essential factor for controlling the particle size of Ag NPs since it is reduced within the nanoscopic templates of the stabilizing agent.
The fact that the silver ions are the effective agents is well documented. They cannot sell silver ions as there is no profit in it. The freely available knowledge in "The art of making colloidal silver" and other publications have made it possible for anyone with access to water, silver, and electricity to make EIS, electrically isolated silver.
 Quoting: abeland1


can confirm: I bought AtlasNova's starter kit about 15 years ago now, and have long since lost count of how many gallons of CS I've made. Thanks, Abeland, for all of your work and research regarding CS.
 Quoting: Anonymous Coward 77696991


Atlasnova's colloidal silver starter kit was our very first offering. We had been only selling the 9999 silver wire up to that point. Many customers for the silver wire would ask our advice on how to make colloidal silver. That was almost 20 years ago, and the widely accepted method at the time was adding salt and letting the current run wild, just letting things go until it turned yellow with a lot of gunk. Using a resistor to limit the current and the laser to find out when to stop the process was the answer. The batteries, the resistor, and the two electrodes separated in the water are connected in series. When the multimeter probes are placed across the series resistor, it reads the voltage dropped by the resistor. That represents the four 9V batteries (36 V) minus the two silver wire electrodes' voltage. If the distilled water is of high quality, the voltage across the resistor will be relatively low as the current will be minimal. As more and more silver ions enter the distilled water, the water will become more conductive. That increases the current in the circuit, causing the voltage across the resistor to increase gradually. At a certain point in time, the voltage increase across the resistor will slow, indicating that the ion production is slowing and larger particles are forming. That will be confirmed with the use of the laser pointer. The multimeter will not measure the PPM of your resulting colloidal silver. To indicate this, you will need to purchase a TDS or EC meter. They are available on eBay for under $20.

Have a look at the instructions for using the starter kit.

[link to www.atlasnova.com (secure)]
 Quoting: abeland1


I discovered AtlasNova from the original GiM, so this does go back a while. I'm still using that starter kit, and still learning about CS. Lately I read about Becker's work showing that CS allows fibroblasts to dedifferntiate into stem cells, meaning super quick wound healing, and even the ability to regrow fingers that might otherwise have been amputated, and most recently I've discovered the applications of CS with plants. The stuff is nigh-on miraculous, and it's thanks to you that I know about it. I've gotten a chuckle from your avatar, because I know how you feel about vast swathes of our species, but I hope that you find some consolation in knowing that once a while, people pay attention. I'll teach my 2 year old son, in time, to make CS, as it's become my go to medecine for almost any ailment.

All a complicated way to reiterate my basic message of "Thanks, Arnold".
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
01/28/2022 10:07 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Thank you very much for your kind words. They mean a great deal to me. Teaching your son how to make colloidal silver is a great idea. Send me a self addressed envelope and I will return it with a 1000 ohm resistor. You can insert this in series in your setup, enabling you to watch the current flow with the volt meter across it set to two volts. It will be a great opportunity to introduce him to ohms law, a thing of beauty.
Anonymous Coward
User ID: 43242073
United States
01/28/2022 10:14 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
During/after the US civil war, doctors who knew how to prepare an IV of silver could become very wealthy. It cured syphilis, and probably more ailments unknown to the patient. Silver is practically useless if it hits an acid such as stomach hydrochloric acid or saliva.
Anonymous Coward
User ID: 77882758
United States
01/30/2022 04:48 AM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Thank you very much for your kind words. They mean a great deal to me. Teaching your son how to make colloidal silver is a great idea. Send me a self addressed envelope and I will return it with a 1000 ohm resistor. You can insert this in series in your setup, enabling you to watch the current flow with the volt meter across it set to two volts. It will be a great opportunity to introduce him to ohms law, a thing of beauty.
 Quoting: abeland1


Hey Arnold, that's very kind of you, but there's no need. I'm slightly familiar with Ohm's law, as I've put together a renewable energy system recently, so working out the relationships between volts, amps, watts and ohms was a thing there. Plus I'm in Europe, so the SSAE stamps wouldn't get too far!

I am curious as to how you chose the 33k ohms resistor for the starter kit. I think I've seen somewhere on your artofmakingCS site some mention of that, so I'll have a dig through there again. Is it fair to say that the higher the resistance, and hence the lower the current (I think!), the smaller the groups of ions coming from the electrodes are? I'm wondering if upping the resistance would mean that I get a better quality (smaller groups of atoms) CS, but increase the time it takes to make. I see your Ultra machine takes a week to make 50ppm CS, so I'm guessing it starts with a lower resistance then gradually increases that, but am very happy to be educated on the details.

I wonder if I might repay the gift of well-made CS you've given me by way of an observation; I've noted in your writings some similar tendencies to some of my mental habits (for example, wanting to know deeply and fully a subject that interests me), and a couple of years ago, I took the below test, which was a revelation to me, as suddenly much of my past made a lot more sense. I've wondered about posting this as I have no wish to offend, and I know people still misunderstand this subject, so feel free to ignore this if you prefer. I just retook the test and scored a healthy 43, so I'm in no doubt as to my own diagnosis!

[link to www.aspergerstestsite.com (secure)]
Anonymous
User ID: 77903609
United States
01/30/2022 04:58 AM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
They now sell Nano Colloidal Silver

Ultra Silver
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
01/30/2022 08:35 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Thank you very much for your kind words. They mean a great deal to me. Teaching your son how to make colloidal silver is a great idea. Send me a self addressed envelope and I will return it with a 1000 ohm resistor. You can insert this in series in your setup, enabling you to watch the current flow with the volt meter across it set to two volts. It will be a great opportunity to introduce him to ohms law, a thing of beauty.
 Quoting: abeland1


Hey Arnold, that's very kind of you, but there's no need. I'm slightly familiar with Ohm's law, as I've put together a renewable energy system recently, so working out the relationships between volts, amps, watts and ohms was a thing there. Plus I'm in Europe, so the SSAE stamps wouldn't get too far!

I am curious as to how you chose the 33k ohms resistor for the starter kit. I think I've seen somewhere on your artofmakingCS site some mention of that, so I'll have a dig through there again. Is it fair to say that the higher the resistance, and hence the lower the current (I think!), the smaller the groups of ions coming from the electrodes are? I'm wondering if upping the resistance would mean that I get a better quality (smaller groups of atoms) CS, but increase the time it takes to make. I see your Ultra machine takes a week to make 50ppm CS, so I'm guessing it starts with a lower resistance then gradually increases that, but am very happy to be educated on the details.

I wonder if I might repay the gift of well-made CS you've given me by way of an observation; I've noted in your writings some similar tendencies to some of my mental habits (for example, wanting to know deeply and fully a subject that interests me), and a couple of years ago, I took the below test, which was a revelation to me, as suddenly much of my past made a lot more sense. I've wondered about posting this as I have no wish to offend, and I know people still misunderstand this subject, so feel free to ignore this if you prefer. I just retook the test and scored a healthy 43, so I'm in no doubt as to my own diagnosis!

[link to www.aspergerstestsite.com (secure)]
 Quoting: Anonymous Coward 77882758


Over six years ago, I started a thread on a forum called goldismoney2. It is a forum created by people who believe in investing in Precious Metals. It is unique in the fact of not allowing any commercial content whatsoever. Any advertising or product promotion is strictly forbidden. It is well moderated and allows complete freedom of expression for the members. As long as the members do not engage in really obnoxious behavior, members can express themselves freely. I chose this forum as it was the only one I could find that had a section concerning Alternative Health topics, including colloidal silver. There was no other place for people to get honest information about colloidal silver. Someone in a colloidal silver business owns every other source I can find or they advertise on the site. Let’s face it. If you accept money from somebody, you’re not going to criticize them for what they say. Once you take money from someone, you are their prisoner. Let’s not kid ourselves. Money Talks, BS walks. Goldismoney2 is supported entirely and only by occasional contributions by the members.
I gave the three most important factors that I had found over the years for making colloidal silver. There were many members of goldismoney2 who had been making colloidal silver for years. They were using a great variety of methods, and many had colloidal silver generators from various manufacturers.
[link to theartofmakingcolloidalsilver.com (secure)]
Three factors will determine the quality of the colloidal silver that you make. The first is the water that you use. It must be distilled to a high degree of purity. You will need some way to check that the water you are using is pure enough. The distilled water that sold in grocery stores in 1-gallon containers will generally be good enough. You will still need some way to check it. That can be done with a conductivity meter or by some method included in the design and function of whatever generator we use.

The second factor is the purity of the silver that we use. We want silver ions and preferably no other metals. We want to make a solution containing silver ions, as they are proven to be of great benefit. Many other metals can do us great harm. We must take every precaution we can to avoid taking toxic metals into our bodies. That is why we use only 9999 silver wire and insist on a certificate of analysis showing the impurities that are present. In the case of the highest quality silver, the most significant contamination will be copper which is not bad in small amounts. That will be the case in silver that comes directly from silver ore. If you buy silver without an assay certificate, it could contain scraps from manufacturing facilities that are alloying silver with any number of other metals. So it's not just a matter of it being 9999, but what is the nature of the additional .01%. When we make colloidal silver, the result is a liquid solution with silver in parts per million (PPM). It makes no sense to try to economize on this. If we consider making colloidal silver at a strength of 10 PPM, for example, 1 ounce of silver wire could make theoretically 100,000 ounces or 1500 gallons of colloidal silver.

The third factor is the amount of time that we allow the process. Hydrogen will appear at the cathode (the negatively charged electrode, where electrons enter the water), and oxygen will appear at the anode (the positively charged electrode). In the days of the 3 9 V battery and silver coins method, we would wait until we saw a cloud. That we were told were pieces of silver forming in the water and stopping the process soon after that. In reality, the cloud created by hydrogen and oxygen microbubbles and meant that the process was in a runaway mode. Disconnecting the batteries at that point would, if you were lucky, get you perhaps a five PPM colloidal silver solution. It would not keep its strength for very long as the larger particles would quickly collide with and absorb the silver ions. A few of us promoted the use of current limiting to prevent the runaway condition. Some of us noted that the higher resistance we used, the better results we obtained in both higher PPM and stability. Many of us tried every conceivable method of stirring to allow the use of a higher current to speed up the process. All of my efforts in this direction failed. I could not get around the fact that for a given surface area of silver anode only a certain amount of current was allowed. There is a region surrounding the anode called the Nernst diffusion area. That is a region that will only allow a specific density of ions to exist before they agglomerate into larger particles. So for those of you with your setups for making colloidal silver, try reducing the current and allowing more time and let us know the results.

Last Edited by abeland1 on 11/22/2022 08:00 PM
Anonymous Coward
User ID: 81211925
Lithuania
01/31/2022 05:17 AM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Hi again Arnold,

Perhaps I should rephrase the question as, have you found that there is an ideal current for making CS? I see at [link to theartofmakingcolloidalsilver.com (secure)] you talk about using 96,000 ohms resistor with a 48V system in order to get 500µA, yet on the CSK610 that I bought all those years ago uses 36V with a 33K ohms resistor, for a current of 1091µA. Given the large discrepancy between these 2 figures, I wonder if over the years you've settled on a particular current (for a given surface area of silver), voltage and amount of time. Regretably I can't afford to buy one of your Ultra generators, so I'm wondering if I could achieve the same result (50ppm EIS) by using much higher resistance and waiting for a week or 2.
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
01/31/2022 02:37 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Hi again Arnold,

Perhaps I should rephrase the question as, have you found that there is an ideal current for making CS? I see at [link to theartofmakingcolloidalsilver.com (secure)] you talk about using 96,000 ohms resistor with a 48V system in order to get 500µA, yet on the CSK610 that I bought all those years ago uses 36V with a 33K ohms resistor, for a current of 1091µA. Given the large discrepancy between these 2 figures, I wonder if over the years you've settled on a particular current (for a given surface area of silver), voltage and amount of time. Regretably I can't afford to buy one of your Ultra generators, so I'm wondering if I could achieve the same result (50ppm EIS) by using much higher resistance and waiting for a week or 2.
 Quoting: Anonymous Coward 81211925

[link to theartofmakingcolloidalsilver.com (secure)]
You're on the right track, but you'll find that it is not possible to create any better than a 25 PPM ionic solution that is stable by simply varying voltage and resistance. It cannot be done without a microprocessor and thousands of hours of effort.

Last Edited by abeland1 on 11/22/2022 08:01 PM
Anonymous Coward
User ID: 81211925
Lithuania
02/01/2022 05:36 AM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Hi again Arnold,

Perhaps I should rephrase the question as, have you found that there is an ideal current for making CS? I see at [link to theartofmakingcolloidalsilver.com (secure)] you talk about using 96,000 ohms resistor with a 48V system in order to get 500µA, yet on the CSK610 that I bought all those years ago uses 36V with a 33K ohms resistor, for a current of 1091µA. Given the large discrepancy between these 2 figures, I wonder if over the years you've settled on a particular current (for a given surface area of silver), voltage and amount of time. Regretably I can't afford to buy one of your Ultra generators, so I'm wondering if I could achieve the same result (50ppm EIS) by using much higher resistance and waiting for a week or 2.
 Quoting: Anonymous Coward 81211925

[link to www.goldismoney2.com (secure)]
You're on the right track, but you'll find that it is not possible to create any better than a 25 PPM ionic solution that is stable by simply varying voltage and resistance. It cannot be done without a microprocessor and thousands of hours of effort.
 Quoting: abeland1


ok, thanks, i'll stick with my trusty astlasnova starter kit and 20ppm EIS.
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
03/31/2022 11:41 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
[link to theartofmakingcolloidalsilver.com (secure)]
If your objective is to keep a certain amount of EIS in your bloodstream as a front-line defense against pathogens (a brilliant move) then the following study is beneficial:
[link to theartofmakingcolloidalsilver.com (secure)]
Dr. Alton summarizes:

[link to theartofmakingcolloidalsilver.com (secure)]
"Ingestion of properly prepared CS does not result in silver accumulating in the body. There is no evidence that silver deposits significantly in hair or fingernails and, in fact, the data supports the conclusion that after taking more than 2 mg of CS per day for several months, silver seems to be purged from the body (mostly through urine) at about the same rate at which it is consumed. Furthermore, upon terminating CS intake, it appears that as much as half the silver residing in body tissue will be purged (through urine and feces, but more and more through feces as time goes on) in less than a month. Even this relatively short residence time could be reduced substantially if several liters of water were consumed daily."
[imgur] [link to i.imgur.com (secure)]

- Roger Altman

The following table from the PDF shows that as long as the silver is in ionic form, it will be eliminated from your system in three months.


https://imgur.com/rOE5END


Last Edited by abeland1 on 11/22/2022 08:01 PM
Anonymous Coward
User ID: 79139945
Canada
03/31/2022 11:53 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Having any salt in the distilled water is where the blue condition comes from.
CS can also be used in water used to wash veggies if spoiling is an issue. A silver dollar in the milk jug is supposed to help make it stay fresh longer.
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
04/02/2022 10:55 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
Hi again Arnold,

Perhaps I should rephrase the question as, have you found that there is an ideal current for making CS? I see at [link to theartofmakingcolloidalsilver.com (secure)] you talk about using 96,000 ohms resistor with a 48V system in order to get 500µA, yet on the CSK610 that I bought all those years ago uses 36V with a 33K ohms resistor, for a current of 1091µA. Given the large discrepancy between these 2 figures, I wonder if over the years you've settled on a particular current (for a given surface area of silver), voltage and amount of time. Regretably I can't afford to buy one of your Ultra generators, so I'm wondering if I could achieve the same result (50ppm EIS) by using much higher resistance and waiting for a week or 2.
 Quoting: Anonymous Coward 81211925

[link to theartofmakingcolloidalsilver.com (secure)]
You're on the right track, but you'll find that it is not possible to create any better than a 25 PPM ionic solution that is stable by simply varying voltage and resistance. It cannot be done without a microprocessor and thousands of hours of effort.
 Quoting: abeland1


ok, thanks, i'll stick with my trusty astlasnova starter kit and 20ppm EIS.
 Quoting: Anonymous Coward 81211925


https://imgur.com/biCSrnQ

Here's a picture showing how the 9V batteries are connected in series.
https://imgur.com/agAR901

Next, find the resistor and form a loop to be able to insert it into the probes from the multimeter. Then, attach an alligator clip to each jumper cable to one of the tests lead tip points.
https://imgur.com/dybdXNQ

Next, find the resistor and form a loop to be able to insert it into the probes from the multimeter. Then, attach an alligator clip to each jumper cable to one of the tests lead tip points.
https://imgur.com/4YehDvR

Attach an alligator clip from the unused jumper cable to one of the battery terminals that are still exposed, and the other end of this cable clip onto the end of one of the lengths of silver wire. Remember the two jumper cables attached to the resistor and test probes? Choose one of these and attach the free end to the remaining battery terminal that is still exposed. Attach the free end of the remaining cable to the other piece of silver wire as shown. Turn the control on the multimeter to two hundred volts DC, as shown in the picture. When the two silver wires are separated, it should read zero volts.
https://imgur.com/xVGL2hd

When you put the two silver wires together, this causes the total voltage to flow through the resistor, and the meter will read approximately thirty-six volts, which happens to be four times nine. That is an excellent time to remember to turn the multi meter off when you are not using it. It does not automatically turn itself off like the more expensive models. If you leave it on for a few days, you will have to buy yet another nine-volt battery for it.
https://imgur.com/BDz72zS

Now, you need a spotless, clear glass. You need to rinse it many times with tap water and then rinse it with some of the distilled water (we buy ours from Wal-Mart) that you will be using to make your colloidal silver. You will then fill the glass almost to the top with your distilled water.
https://imgur.com/x82Vr4f

Place the silver wires at opposite ends of the glass containing the distilled water as shown. Make sure that the silver wires are not touching each another. We also do not want any silver wire immersed in the distilled water to touch the glass.

Last Edited by abeland1 on 11/23/2022 09:08 AM
abeland1
The Art of making Colloidal Silver

User ID: 81679411
United States
04/02/2022 10:56 PM

Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
https://imgur.com/VTR7xbJ

As you can see, the voltage dropped across the resistor is 20.4 volts. The reading of 20.4 volts indicates that the distilled water, in this case, is not of the same quality as used in the picture below. If this is as good water as you can get, it is still okay to use for making colloidal silver. Keep in mind that the ultimate quality of the colloidal silver that you make depends greatly on the purity of the water used at the start.
https://imgur.com/rDaSt8M

Here is the same configuration using a different brand of distilled water. The voltage reading of 4.3 volts across the resistor indicates a current of less than 0.1 milliamps. That is the maximum amount that is allowable in terms of how good your distilled water is. If it reads much more than that, you need to find a better source of distilled water.
https://imgur.com/YXRSetA

To speed up the process, you can move the silver wires closer together so that you may generate ions more quickly. The more ions in the water, the higher the water's conductivity, which allows more current to flow. You will now allow the process to continue.
https://imgur.com/bfpwKB3


It is at this point that the red laser pointer comes into play. Actual particles will start to form now as the ions will cluster together and no longer exist as ions but clumps of silver atoms forming colloidal silver. If these clumps of atoms exceed a diameter of forty nanometers, our water will begin to take on a yellow tinge. Long before this, our laser light will detect the colloidal particles, as even microscopic particles can scatter laser light as it travels through a medium, in this case, water. The less ambient light that is present, the easier it will be to see the presence of the particles. The whole purpose is to achieve the maximum amount of ionic silver while limiting the particle size. Start using your laser pointer once the voltmeter approaches thirty volts, preferably in the dark.

The beam will still be visible even in normal room light as the process continues. You will be done, and you will have made a solution of colloidal silver as good as or better than anything you can buy at any price.
https://imgur.com/8uLbeII

You can probably see quite a significant build-up on both of your silver wires (electrodes). They will require a good scrubbing before using them again. Use the green scrubbing pads that are included in the starter kit for this.
Anonymous Coward
User ID: 74045302
Denmark
04/02/2022 10:59 PM
Report Abusive Post
Report Copyright Violation
Re: How to use Colloidal Silver as Medicine
You basically dissolve silver via electrolysis in a soluble such as water and then just drink it (dissolved silver)





GLP