>>>SILVER ION has the proven ability to cause any HUMAN CELL to revert back to a STEM CELL!!<<<

their basic kit is $400...you can get a better basic kit for 90 bucks from [link to www.atlasnova.com (secure)] and buy a nebulizer for ten bucks from ebay.

i rather wonder what "The SilverLungs Generator features a magnetic stirring system that allows the flask to be sealed during the electrolysis process which keeps your silver solution contamination-free" actually means too, what is the source of contamination and how does "magnetic stirring" reduce that? sounds like bullshit to me, or as mr. Beland put it, "There is a great deal of information that consists of thinly concealed infomercials, gibberish, and downright dangerous instructions on how to make colloidal silver."

can confirm; i just tried something similar with a scrape my son did on his knee, soaked a tissue in ionic silver and left it on the wound for a few hours. rather than a week to heal, it was completely healed within 48 hours. on an open wound, the stuff is amazing for promoting healing.

i wonder what role electricity plays in silver's healing ability. becker's patents and books show that he was using very tiny voltages when using silver for wound healing, and that the correct voltages were key to the process (such that an increase of a few milivolts changed the process from healing to harm). it's a tragic consequence of big pharma's focus solely on profit that becker's work has never been continued, as the role of electricity in biology has been largely ignored in recent decades. his book, "The Body Electric" is worth a read for anyone interested in this: [link to en.wikipedia.org (secure)]

https://imgur.com/w8JRJEC

You have just pinpointed why I have not responded to the central issue of the thread. Although I have personally witnessed the healing effect of silver ions, I have no clue why they have this ability.
Upon reviewing the work of Dr. Becker, it occurs to me that at the time of his experiments, the art of making colloidal silver was relatively crude compared to what we can achieve today. Now that we have a standardized 50 PPM ionic solution, we can deliver silver ions in a much more controlled and measurable manner. I can imagine a container full of 50 PPM and a silver anode could be attached to some part of a person's body as a simple electrode could be attached to a different part of the body. A channel of silver ions would be created that could be targeted to any part of the body.

Last Edited by abeland1 on 11/21/2022 07:50 PM

[link to en.wikipedia.org (secure)]

https://imgur.com/08CsDuF

"The resulting flow from applying a voltage is a plug flow. Unlike a parabolic profile flow generated from a pressure differential, a plug flow’s velocity profile is approximately planar, with slight variation near the electric double layer. This offers significantly less deleterious dispersive effects and can be controlled without valves, offering a high-performance method for fluid separation, although many complex factors prove this control to be difficult. Because of difficulties measuring and monitoring flow in microfluidic channels, primarily disrupting the flow pattern, most analysis is done through numerical methods and simulation."

bump

https://imgur.com/llW3cRl

The 1 gallon per day colloidal silver generator
I joined a forum called “Gold is Money2”. It is a forum for responsible individuals and serious investors. One sub-forums Is devoted to alternative health and colloidal silver. I started posting on this forum about what I have learned about making colloidal silver. I was greeted enthusiastically. With the help of their input, I decided to make a 1 gallon per day colloidal silver generator. As these people could afford to spend money for the best in life, I designed a no-compromise generator. It would produce 1 gallon per day of colloidal silver of strength over 20 PPM with small particle size and stability that would allow it to be stored in clear glass containers for an unlimited time. We are still selling this same unit some 20 years later. The cost for this unit is over $200 as it includes over 3 ounces of AtlasNova 9999 silver wire. Many of these make colloidal silver for large families, and many more are used commercially. The more enterprising customers of these units secure a supply of bottles and labels and develop a local business with one great advantage. A little-known fact is that colloidal silver does not travel well. Vibration causes the ions to collide and form larger particles until they drop out of the solution, becoming tiny black dots at the bottom of the bottle. I confirmed this with one of the 1st gallons I made with the 1 gallon per day generator. I shipped a friend in Florida 1 gallon that measured 22 ppm, asking him to send it back to me. UPS ground both ways. When I got it back, it measured only seven ppm. Even if the manufacturer used the proper method and took the required time to make it properly, it would still have to be shipped. So if people really can’t handle making it themselves, they should buy it from a local source.

The one gallon colloidal silver generator (CSG-1G) will enable you to make a gallon of high quality colloidal silver in 24 hours (more or less), depending on the quality of your distilled water. Powered by a universal power supply. Designed, manufactured, and assembled in the USA.SKU: CSG-1G

https://imgur.com/a/FWpNmul

The one-gallon jar that is supplied will be clean when you receive it. However, a good idea would be to fill it half full of distilled water. Replace the cap tightly and give it a good deal of motion so that any dust particles that may have entered will now be in the water.

https://imgur.com/a/w2adIme

Then dispose off the water. Pour distilled water into the jar. Do not fill the jar beyond 1 inch below the top of the jar.

https://imgur.com/a/IWJXKlv

Make sure that the toggle switch on the printed circuit board (generator) is in the fully upright position. The sliding potentiometer should be positioned all the way to the left. Insert the silver wires into the holes as shown.

https://imgur.com/a/LHqHF4F

Place the printed circuit board (generator) with the silver wires on to the jar. Make sure that none of the silver wires are touching any part of the jar where the water is present. The silver wires should be as far apart as possible.

https://imgur.com/a/ARY7DKv

Plug the Universal Power Supply into a standard AC outlet.
Once the power supply is plugged in, you will see the red LED lit to confirm that your generator is ON.

https://imgur.com/a/s65z9Do

https://imgur.com/a/abjwP2j

Plug the test leads into the Multimeter at the two lower sockets on the meter. The top socket is not used. It is only there for measuring very high amperage.

https://imgur.com/a/KxSjhqk

Put the two test leads into the two outer test points on the generator as shown. The meter should read zero volts.

https://imgur.com/a/Yr1eEP9

Position the sliding potentiometer all the way to the left. This will give you the lowest current. As shown in the picture, our digital meter reads 163 microamps. Please note that the reading will vary depending on the quality of your distilled water. Positioning the sliding potentiometer all the way to the left will take longer to make colloidal silver but will give a much better result. This reading will increase slightly as time goes by. It will
just take longer to get a good red laser beam but you will end up with a higher PPM and more stable colloidal silver.

https://imgur.com/a/fS8dAs5

Positioning the sliding potentiometer all the way to the right will give you the highest current. As you can see in the picture, our digital meter reads 917 microamps. Please note that the reading will vary depending on the quality of your distilled water.

https://imgur.com/a/7xcYrW4

The position of the toggle switch points to the set of wires that will be the anode. By moving the toggle switch all the way to the left, the silver wires that were the anode will now serve as the cathode. You can set up your current the way you want. For these instructions, we will set our sliding potentiometer to the middle, keep the toggle switch all the way to the right, and set our current to 263 microamps. And we will continue the process.

https://imgur.com/a/s21irdU

It is now the next morning and you can see that the current has increased overnight to where it now reads 324 microamps.

https://imgur.com/a/Yki13T8

We now use our red laser pointer supplied with the kit and check to see that we have made a sufficient quantity of actual silver particles by seeing the red beam across the jar n dim room light. The first picture was taken in a bright room and the second picture was taken in a dark room.

https://imgur.com/a/IwvAqAD

https://imgur.com/a/9R2ij24

The red laser beam indicates that we have made particulate silver as well as ionic. As you can see by this picture, we have a nice strong red beam even in normal indoor room light. The water itself is still crystal clear. This means that we have avoided making overly large particles.
In the days before good laser pointers were available; the only way we had to ensure that we had made larger particles was for the water to turn yellow. You will find many people who, because of this, still believe that Colloidal Silver should be yellow in color. The fact is that a yellow color Colloidal Silver indicates particles in excess of 40 nanometers in size. Clear color means smaller particles. Small particles are better. Please note that if you have any kind of equipment to check your PPM, make sure that the toggle switch is in the fully UPRIGHT position before doing so.

https://imgur.com/a/5VEX2vi

n this picture we have submerged the probe of our Amber Electronic Conductivity Meter to measure the value of conductivity in Microsiemens. (Please note that our toggle switch is in UPRIGHT position). This is the same value for the PPM (parts per million) of the ionic part of our colloidal silver. As you can see in our picture, our PPM reads 16.2.
We are now finished with the process of making our one-gallon of colloidal silver. Unplug the universal power supply, remove the generator from the jar and clean the silver wires with the supplied scrubbing pad. Two or three swipes should suffice.

https://imgur.com/a/amlatNS

https://imgur.com/a/U66M1OB

We now have a one-gallon of better colloidal silver than can be purchased at a store. We can do this hundreds of times before we have to buy more silver wire. You can just put the lid back on the jar to cover your One Gallon Colloidal Silver until you’re ready to use it.

Cool thread, thnx OP!


How about colloidal anything?
A pearl or so.
Just an idea popping up.

Or decarbolix a plant, or what's it called.
I had birdseeds growing and I think it's hemp lol. Ikyn

silver ions are known to be a useful anti-infective agent since the late 1880s, when German gynecologist, Carl Siegmund Franz Credé, introduced the use of silver nitrate for the prophylaxis of gonorrhea opthalmicum. Even nowadays, one of the strategies which gains renewed attention for combating bacterial infections and preventing wound sepsis is the use of silver

Improved Immunoregulation of Ultra-Low-Dose Silver Nanoparticle-Loaded TiO2 Nanotubes via M2 Macrophage
In the present study, we fabricated the Ag@TiO2-NTs with controlled releasing of ultra-low-dose Ag+ ions using an electrochemical anodization method and investigated the immune-regulatory influences of Ag@TiO2-NTs on the macrophage polarization, osteo-immune microenvironment as well as its molecular mechanisms in vitro and in vivo. The results showed that Ag@TiO2-NTs could not only inhibit the inflammation process but also promote the bone healing by inducing healing-associated M2 polarization. This strategy may be promising for clinical applications and provide new insights into the surface modification of biomaterials.

[link to www.dovepress.com (secure)]

[link to theartofmakingcolloidalsilver.com (secure)]

https://imgur.com/a/8YtaPR7

Since I started this thread in 2014, we have seen one study after another for this or that latest silver nanoparticles. All produced by some unique process that is patented. All of these studies show the wonderful effects of their particular substance against infectious agents. I have believed that the effectiveness of these various wonderful new nanosilver concoctions was that once they enter our body, they eventually come into contact with the oxygen, resulting in the release of silver ions. Single silver’ ions with a negative charge. Here is a report that exposes the entire scam:

[link to www.ncbi.nlm.nih.gov (secure)]

I quote from the “Summary and Conclusions.”
“We presented the similarities and differences in the mode of silver action on Gram-positive and Gram-negative bacteria. We noticed a gap in knowledge about the molecular mechanism of bacteria, both Gram-positive and Gram-negative, to silver nanoparticles. If we assume that silver nanoparticles are silver ions source, it is possible that the molecular mechanism of bacterial resistance is analogue to mechanism described for Ag+. If there is another way of antibacterial toxicity of silver nanoparticles, it is likely that different mechanisms of resistance to silver nanoparticle exist, for both Gram-negative and Gram-positive bacteria. The variety of silver nanoforms causes that every product with silver nanoparticles should be considered separately as a compound with different physico-chemical properties, different mode of action and different mechanisms of resistance.”

https://imgur.com/wbxFoE7

So the question I ask is if silver ions are more effective at eliminating bacteria than silver nanoparticles, why is all this time and money being spent on developing so many different nanoparticles?
You can’t patent silver ions. Moreover, everybody can make their own.
Money money money.
Silver nanoparticles versus silver ions?

Last Edited by abeland1 on 11/21/2022 07:54 PM

[link to www.ncbi.nlm.nih.gov (secure)]
Similarities and Differences between Silver Ions and Silver in Nanoforms as Antibacterial Agents
Silver is considered as antibacterial agent with well-known mode of action and bacterial resistance against it is well described. The development of nanotechnology provided different methods for the modification of the chemical and physical structure of silver, which may increase its antibacterial potential. The physico-chemical properties of silver nanoparticles and their interaction with living cells differs substantially from those of silver ions. Moreover, the variety of the forms and characteristics of various silver nanoparticles are also responsible for differences in their antibacterial mode of action and probably bacterial mechanism of resistance. The paper discusses in details the aforementioned aspects of silver activity.

Last Edited by abeland1 on 10/31/2022 11:21 PM

I have started a new thread here on GLP.
Thread: The Art of making Colloidal Silver / Silver Ions / Electrically Isolated Silver - How to Measure Ionic Strength - Boost your Immune system
[link to www.goldismoney2.com (secure)] is shutting down. The links I used in my posts on GLP to that site no longer work. It is my hope that the new " the art of making colloidal silver" thread will become as useful. In correcting the link problem, I notice the high quality of replies. Please have a look at the new thread and contribute what you can.
Best regards,
Arnold

Let’s take the CSG one out for a ride
We have purchased our distilled water and we’re going to measure it with a lab quality conductance meter. We confirm that it is distilled and measures 1.4 microsiemens. An increase in the microsiemens reading as we progress will indicate directly the parts per million (ppm) value of the electrically isolated silver (EIS) that we have made.

https://imgur.com/a/hhAgqvW

https://imgur.com/a/zZqqPbI

https://imgur.com/a/e3Y2AFG

2 pieces of 4-inch 12 gauge pure 9999 silver wire
1 piece of scrubbing pad (to clean the silver wires)
1 Atlasnova red laser pointer (no batteries)
Please note that the color of the body of the red laser pointer will vary depending on what’s available in our stock.
To complete the parts and equipment in making colloidal silver using our CSG-1, you need to purchase the following:
1 9-volt battery
Distilled water
2 AAA batteries for the red laser pointer
Clean 12-ounce clear glass

You will receive your generator as shown in the picture below:

https://imgur.com/a/17dakwt

After you have bought 1 nine-volt battery and distilled water, all you need to do is
connect the nine-volt battery to the battery connector, as shown below.

https://imgur.com/a/HJHYlkK

Pour distilled water into a clean 12-ounce clear glass. Do not fill your glass beyond 1
inch below the top of the glass.

https://imgur.com/a/CsKaMvQ

https://imgur.com/a/q7NoSpX

Place the generator on the rim of the glass as shown in the picture. Make sure that the silver wires are not touching each other. Position the printed circuit board (generator) on the rim of the glass in such a way that the ends of the silver wires in the water are near the center of the water, and keep the silver wires at least 1 inch away from any glass surface in the water. Also, make sure that any part of the generator (printed circuit board)
is not touching the water.
We can see that the LED is only faintly glowing. If it glows any brighter than this, it would indicate that the water we are using is not of the purity required for making colloidal silver. Note that we have taken this picture in very bright light.

https://imgur.com/a/oPZumj9

In this picture, we have turned all our lights off and because of this it is much easier to see the LED’s brightness.

https://imgur.com/a/U8v50jD

It is now a bit more than two hours later and we can see that the LED is glowing much
brighter, indicating that we are running a much higher current than when we started. This indicates that we have generated enough ions to increase the conductivity of the water.

[link to imgur.com (secure)]


[link to theartofmakingcolloidalsilver.com (secure)]
[link to theartofmakingcolloidalsilver.com (secure)]

To check if we are done with the process, place your finger on the generator and gently move the position of the wires, as shown in the picture above. Observe the change, if any, in the brightness of the LED. If the LED dims noticeably when we moved the wires in the water, we are not finished.
It is important to gently move the position of your generator the when you see the red LED glowing brighter during the process.

https://imgur.com/a/aPHouge

In this picture we can see that the LED is much less bright after we have moved the position of the silver wires.

https://imgur.com/a/ZjlnDAK

This is confirmed by measuring the PPM of the water in the glass. It reads slightly over
two PPM. So we continue the process.

https://imgur.com/a/JfyKRdo

We are now 3 hours into the process, our conductivity meter reads 5 PPM, and we
continue the process.

https://imgur.com/a/CTa6STN

We are now five hours into the process and we can see that the LED is once again at full brightness. At this time, we will once again do the finger test. We observe that the LED’s brightness remains the same when we press on the generator. This means that we have achieved well over 10 PPM strength of colloidal silver. Please note that your process could be less than 5 hours depending on the quality of your distilled water.

https://imgur.com/a/1dBuEB3

We confirm this with the use of our electrical conductivity meter. It reads 15.1 PPM.
Please note that the reading will vary depending on the quality of your distilled water.
We are now finished with the process of making our colloidal silver.

https://imgur.com/a/b45LSRV

Remove the generator from the water and clean the silver wire with a green scouring pad supplied. Two or three swipes should be sufficient.

https://imgur.com/a/Cnlul5f

We now use our red laser pointer included with the kit to confirm the fact that we have made actual particles as well as the ions that are measured by an electrical conductivity meter. If we include the particles in our measurement, which are not shown by conductivity, the true PPM would be 17 to 18 in parts per 1,000,000.

In the days before good laser pointers were available; the only way we had to ensure that we had made larger particles was for the water to turn yellow. You will find many people who still believe that Colloidal Silver should be yellow because of this. The fact is that a yellow color Colloidal Silver indicates particles over 40 nanometers in size. Clear color, like water, means smaller particles. Small particles are better. Some people refer to silver particles this small as nanosilver.
Filter the colloidal silver to remove any large particles that may have formed. A coffee maker filter of the unbleached variety is perfect for this.
We now have 12 ounces of better colloidal silver than can be purchased at a store. We can do this hundreds of times before we have to buy more silver wire.
[link to theartofmakingcolloidalsilver.com (secure)]
[link to theartofmakingcolloidalsilver.com (secure)]

If your objective is to keep a certain amount of EIS in your bloodstream as a front-line defense against pathogens (a brilliant move) then the following study is beneficial:
[link to theartofmakingcolloidalsilver.com (secure)]
Dr. Alton summarizes:

"Ingestion of properly prepared CS does not result in silver accumulating in the body. There is no evidence that silver deposits significantly in hair or fingernails and, in fact, the data supports the conclusion that after taking more than 2 mg of CS per day for several months, silver seems to be purged from the body (mostly through urine) at about the same rate at which it is consumed. Furthermore, upon terminating CS intake, it appears that as much as half the silver residing in body tissue will be purged (through urine and feces, but more and more through feces as time goes on) in less than a month. Even this relatively short residence time could be reduced substantially if several liters of water were consumed daily."

- Roger Altman

The following table from the PDF shows that as long as the silver is in ionic form, it will be eliminated from your system in three months.

https://imgur.com/rOE5END

Silver ions have been shown to promote tissue repair in a number of ways. They can:

Reduce inflammation. Silver ions can help to reduce inflammation, which is a key step in the healing process. Inflammation can damage tissue and slow down the healing process.
Attract white blood cells. Silver ions can attract white blood cells to the site of injury. White blood cells are important for fighting infection and removing dead tissue.
Promote the growth of new tissue. Silver ions can promote the growth of new tissue by stimulating the production of growth factors. Growth factors are proteins that help to repair damaged tissue.
Protect against infection. Silver ions can protect against infection by killing bacteria and other microbes. This can help to prevent infection from slowing down the healing process.
Overall, silver ions are a promising new treatment for a variety of tissue injuries. They are safe, effective, and have a number of different mechanisms of action. More research is needed to determine the long-term safety and efficacy of silver ions, but they are a promising new treatment option.

Here are some specific examples of how silver ions have been shown to help rebuild tissue:

In a study of diabetic foot ulcers, silver ions were shown to significantly reduce the size of the ulcers and improve healing time.
In a study of burns, silver ions were shown to reduce the severity of the burns and improve healing time.
In a study of skin wounds, silver ions were shown to reduce the risk of infection and improve healing time.
These are just a few examples of how silver ions have been shown to help rebuild tissue. More research is needed to determine the full potential of silver ions for tissue repair, but they are a promising new treatment option.

[link to www.cell.com (secure)]
Cell Stem Cell is a broad-spectrum journal that covers the entire spectrum of stem cell biology. Topics covered include embryonic stem cells, pluripotency, germline stem cells, tissue-specific stem cells, stem cell differentiation, epigenetics, stem cell genomics and systems biology, genome reprogramming, cancer stem cells, stem cell niches, stem-cell-based disease models, nuclear transfer technology, bioengineering, drug discovery, in vivo imaging of stem cells, therapeutic applications, regenerative medicine, clinical and translational insights, stem cell research policies, ethical issues, and technical or resource-based innovations.
Cell Stem Cell publishes research reports describing novel results of unusual significance in all areas of stem cell research. Each issue also contains a wide variety of review and analysis articles covering topics relevant to stem cell research ranging from basic biological advances to ethical, policy, and funding issues.

Cell Stem Cell is edited by an expert team of in-house editors and is affiliated with the International Society for Stem Cell Research (ISSCR). For more information about the ISSCR, see [link to www.isscr.org.]